How to Identify an Industrial Bearing for Replacement
Use the marking as a starting point, then confirm the physical design and operating duty before approving a replacement.
Read technical guide →Engineering and purchasing support
Prepare better bearing specifications and RFQs
These guides focus on the information required to identify, measure and source industrial bearings. They support preliminary selection; final approval still requires verified dimensions and operating conditions.
How to Measure a Track Roller or Cam Follower
Separate the mounting dimensions from the running-surface dimensions and document every feature that controls installation.
Read technical guide →Industrial Bearing RFQ Checklist for Buyers
A complete RFQ reduces cross-reference errors, repeated email and delays in technical review.
Read technical guide →How to Specify a Combined Bearing for Mast Guides
Record the family, mounting type, envelope and profile match before approving a mast-guide replacement.
Read technical guide →NUKR vs KRV Cam Follower Selection
Both are metric stud followers. Confirm OD, stud thread, seals and whether a caged or full-complement design is required.
Read technical guide →Hertzian Pressure and Combined Bearing Selection
Bearing catalog capacity alone does not select the system: the local contact between the radial roller and steel profile must also be checked.
Read technical guide →Combined Bearing Rail Clearance and Alignment
Set clearance across the complete travel, not at one convenient position, and distinguish rail alignment from axial-roller adjustment.
Read technical guide →How to Weld a Combined Bearing Hub or Mounting Plate
Weld only the designated weldable hub or approved plate assembly, control heat input and protect hardened bearing surfaces.
Read technical guide →How to Adjust an Eccentric Combined Bearing
Adjustment compensates for assembly clearance; it does not correct a badly distorted or mismatched guide profile.
Read technical guide →Combined Bearing Lubrication and Maintenance
Use the quoted grease and seal execution, then set inspection intervals from actual duty and contamination rather than a universal calendar rule.
Read technical guide →Combined Bearings for High Temperature and Corrosion
Temperature and corrosion capability belongs to the complete quoted execution, not to a base model number alone.
Read technical guide →Buyer support
Export, cross-reference and factory evidence
Use these pages with the technical guides when you are preparing an overseas quotation or a catalog cross-reference.
Combined bearing selection tool
Estimate a preliminary load screen and match 4.xxx bearings to Standard NbV profiles.
Open guide →China factory export RFQ
Factory-direct export from Changzhou with Shanghai packing and overseas RFQ checklist.
Open guide →Export shipping & Incoterms
EXW, FOB, CIF notes plus packing and document expectations for bearing shipments.
Open guide →WINKEL cross reference
Use 4.xxx, PR4, JD, MR, TR and 400-series references to narrow a replacement.
Open guide →Catalog downloads
NATR, NUKR, NNTR, combined bearing and SL series factory PDF references.
Open guide →OEM custom program
Drawing-based OEM assemblies for plates, special track rollers and private-label work.
Open guide →Application cases
Forklift mast, conveyor, welded-plate and steel-equipment factory references.
Open guide →