WINKEL Bearing Cross Reference Guide: selection, replacement and quotation support
Use WINKEL, CR, Libe, Alfatec, JD, MR, TR and 400-series references to narrow a replacement search. The table below maps common WINKEL series to reviewed replacement support.
Cross references and catalog data support preliminary identification. Confirm the current drawing, load capacity, tolerances and application requirements before ordering. See the industrial bearing RFQ checklist for the full data set.
How cross references work
Different brands may use distinct numbers for related dimensional families, but suffixes and executions can vary.
- WINKEL 4.xxx and PR4.xxx
- CR 400-xxxx and DR400-xxxx
- MR, TR and JD dimensional references
Verification sequence
Start with the full marking, then compare drawing and duty before approving a replacement.
- Dimensions and mounting
- Fixed or adjustable axial roller
- Loads, speed and lubrication
WINKEL model cross-reference table
| WINKEL reference | Series / execution |
|---|---|
| 4.053 | Standard fixed axial |
| 4.054 | Standard fixed axial |
| 4.055 | Standard fixed axial |
| 4.056 | Standard fixed axial |
| 4.057 | Standard fixed axial |
| 4.058 | Standard fixed axial |
| 4.059 | Standard fixed axial |
| 4.060 | Standard fixed axial |
| 4.061 | Standard fixed axial |
| 4.062 | Standard fixed axial |
| 4.063 | Standard fixed axial |
| 4.064 | Standard fixed axial |
| 4.039 (JD185-95) | Standard fixed axial |
| PR4.054 | Precision PR series |
| PR4.055 | Precision PR series |
| PR4.056 | Precision PR series |
| PR4.058 | Precision PR series |
| PR4.059 | Precision PR series |
| PR4.061 | Precision PR series |
| PR4.062 | Precision PR series |
| PR4.063 | Precision PR series |
| 4.454 | Eccentric adjustable |
| 4.455 | Eccentric adjustable |
| 4.456 | Eccentric adjustable |
| 4.457 | Eccentric adjustable |
| 4.458 | Eccentric adjustable |
| 4.459 | Eccentric adjustable |
| 4.460 | Eccentric adjustable |
| 4.461 | Eccentric adjustable |
| 4.462 | Eccentric adjustable |
| 4.463 | Eccentric adjustable |
| 4.085 | Jumbo high-load |
| 4.089 | Jumbo high-load |
| 4.090 | Jumbo high-load |
| 4.091 | Jumbo high-load |
| 4.092 | Jumbo high-load |
| 4.093 | Jumbo high-load |
| 4.094 | Jumbo high-load |
| 4.095 | Jumbo high-load |
| 4.096 | Jumbo high-load |
Model numbers are identification references, not automatic interchangeability. Every replacement is confirmed against dimensions, load, mounting and operating data before quotation.
Information required for winkel bearing cross reference guide quotation
- 1 Identify — model, suffix and machine reference
- 2 Measure — envelope and mounting dimensions
- 3 Describe duty — load, speed, shock and environment
- 4 Approve — proposed drawing and documents
Related products and buyer resources
More buyer support guides
WINKEL Bearing Cross Reference Guide FAQ
How do I specify winkel bearing cross reference?
Send the complete model, all suffixes, quantity, delivery country and a controlled drawing when available. Also state load, speed, environment and mounting details.
Can you verify an equivalent winkel bearing cross reference?
Yes. Cross-reference numbers start the review, but interchangeability is confirmed from dimensions, internal design, adjustment, load capacity, lubrication and operating conditions.
What information is required for a quotation?
Provide the old marking, photos or drawing, critical dimensions, application, quantity and destination. Required inspection documents should be stated before quotation.
Technical note: This guide supports preliminary sourcing. Confirm the controlled drawing, tolerances, load capacity and application requirements before ordering. Return to the solutions library, browse bearing products or review quality and inspection scope.