Combined Bearings for Industrial Machinery: selection, replacement and quotation support
A routing guide for combined bearings used in forklifts, logistics, steel equipment, stacker cranes, heavy linear guides and telescopic systems.
Cross references and catalog data support preliminary identification. Confirm the current drawing, load capacity, tolerances and application requirements before ordering. See the industrial bearing RFQ checklist for the full data set.
Why one unit carries radial and axial load
A combined bearing integrates a radial roller and an axial roller in one compact unit that runs inside a steel profile. That replaces a separate radial bearing plus a side-thrust guide, reduces parts and shortens assembly.
- Radial roller and axial roller in one housing
- Compact profile-running envelope
- Fewer components than a split arrangement
Route by equipment type
Start from the machine, not the load alone. Each application has its own duty, contamination and adjustment needs.
- Forklifts and mast channels
- Stacker cranes and AS/RS
- Steel mill handling equipment
- Heavy-duty linear guides
- Telescopic and overhead systems
Selection starting point
Record the model or machine number, envelope dimensions, load directions, speed, contamination and mounting. A controlled drawing or marking photos turn a guess into a quotation.
- Model, suffix and machine reference
- d, D, H, h and B dimensions
- Load, speed, environment
Information required for combined bearings for industrial machinery quotation
- 1 Identify — model, suffix and machine reference
- 2 Measure — envelope and mounting dimensions
- 3 Describe duty — load, speed, shock and environment
- 4 Approve — proposed drawing and documents
Related products and buyer resources
More applications guides
Combined Bearings for Industrial Machinery FAQ
How do I specify combined bearings for industrial machinery?
Send the complete model, all suffixes, quantity, delivery country and a controlled drawing when available. Also state load, speed, environment and mounting details.
Can you verify an equivalent combined bearings for industrial machinery?
Yes. Cross-reference numbers start the review, but interchangeability is confirmed from dimensions, internal design, adjustment, load capacity, lubrication and operating conditions.
What information is required for a quotation?
Provide the old marking, photos or drawing, critical dimensions, application, quantity and destination. Required inspection documents should be stated before quotation.
Technical note: This guide supports preliminary sourcing. Confirm the controlled drawing, tolerances, load capacity and application requirements before ordering. Return to the solutions library, browse bearing products or review quality and inspection scope.