Configuration illustration for this bearing family. Use the specification table and controlled drawing for final verification.
High load axial support combined bearing
MR4182
MR4182 heavy-load combined bearing adjustable from outside for large steel-section guide systems.
Cross-reference note: WINKEL and other manufacturer designations are used for buyer identification. We manufacture compatible bearings to the confirmed drawing unless an original branded product is expressly quoted.
Specifications
MR4182 technical data
| d | 110 mm |
|---|---|
| D | 220 mm |
| B | 60 mm |
| H | 115 mm |
| H1 | 90 mm |
| C1 | 70 mm |
| d1 | 150 mm |
| S | 13.5 mm |
| r | 5 mm |
| Cr | 365 kN |
| C0r | 720 kN |
| Ca | 105 kN |
| C0a | 230 kN |
| Speed | Not published |
| Mass | Not published |
| Adjustment | Externally adjustable |
Selection notice: Dimensions and catalog ratings are factory reference data. Verify the controlled drawing during quotation.
MR4182 cross references
Common purchasing and maintenance references include MR4182 · MR4182 heavy load combined bearing · MR4182 externally adjustable bearing · MR-4182 · MR 4182 .
Suffixes, seals, lubrication, OD variants and mounting plates can change fit. Send the complete marking and a controlled drawing for confirmation.
How buyers commonly identify this bearing
Purchasing teams, forklift service companies and machine builders may describe the same requirement in different ways. These descriptions are useful search clues, not proof of interchangeability:
- MR4182 combined bearing replacement
- MR4182 combined roller bearing dimensions
- MR4182 mast guide bearing
- WINKEL MR4182 compatible bearing
- MR4182 heavy load combined bearing bearing equivalent
- MR4182 externally adjustable bearing bearing equivalent
- MR-4182 bearing equivalent
- MR 4182 bearing equivalent
Execution guidance
High load axial support design and inspection
Design function
A separate hardened axial support carries higher side load than the compact standard arrangement.
Installation and adjustment
Confirm support orientation, available structural clearance and the specified washer or mounting arrangement.
Inspection focus
Inspect the hardened support, contact face, axial position, washer stack and both load paths.
Application
Application and RFQ checklist
Heavy steel handling, large lifting columns, crane guides and severe-duty linear guide structures.
Information required for selection
- Dimensions
- d, D, H, B, S, T and plate or stud geometry
- Load
- Radial load, axial load, shock, speed and duty cycle
- Execution
- Standard, precision, fixed axial or eccentric-adjustable
- Environment
- Temperature, contamination, sealing and lubrication
Related combined bearing models
Browse adjacent models for dimensions, applications and common cross references.
MR4181 MR4181 heavy load combined bearing · MR4181 externally adjustable bearing · MR-4181 MR4183 MR4183 heavy load combined bearing · MR4183 externally adjustable bearing · MR-4183 MR.146 MR.146G2 · MR146 high load combined bearing · MR146 MR.147 MR.146G2 · MR147 high load combined bearing · MR147 MR.148 MR.148G2 · MR148 high load combined bearing · MR148 MR.149 MR.148G2 · MR149 high load combined bearing · MR149 