Configuration illustration for this bearing family. Use the specification table and controlled drawing for final verification.
High load axial support combined bearing
MR.150
MR.150 high-load combined bearing with separate axial support and shim-adjustable axial position.
Cross-reference note: WINKEL and other manufacturer designations are used for buyer identification. We manufacture compatible bearings to the confirmed drawing unless an original branded product is expressly quoted.
Specifications
MR.150 technical data
| AxialSupport | MR.148G2 |
|---|---|
| d | 45 mm |
| D | 88.9 mm |
| C | 30 mm |
| H | 61 mm |
| H1 | 48 mm |
| H2 | 13 mm |
| D1 | 69.5 mm |
| C1 | 21 mm |
| d1 | 59 mm |
| S | 7 mm |
| Angle | 20° |
| r | 3 mm |
| R | 850 mm |
| R1 | 700 mm |
| D2 | 52 mm |
| d2 | 33 mm |
| H3 | 28 mm |
| Cr | 84 kN |
| C0r | 133 kN |
| Ca | 14 kN |
| C0a | 22 kN |
| Speed | 700 rpm |
| Mass | 1.70 kg |
| Adjustment | 0.3 / 0.5 / 1.0 mm adapter washers |
Selection notice: Dimensions and catalog ratings are factory reference data. Verify the controlled drawing during quotation.
MR.150 cross references
Common purchasing and maintenance references include MR.150 · MR.148G2 · MR150 high load combined bearing · MR150 · MR-150 · MR 150 · MR,150 .
Suffixes, seals, lubrication, OD variants and mounting plates can change fit. Send the complete marking and a controlled drawing for confirmation.
How buyers commonly identify this bearing
Purchasing teams, forklift service companies and machine builders may describe the same requirement in different ways. These descriptions are useful search clues, not proof of interchangeability:
- MR.150 combined bearing replacement
- MR.150 combined roller bearing dimensions
- MR.150 mast guide bearing
- WINKEL MR.150 compatible bearing
- MR.148G2 bearing equivalent
- MR150 high load combined bearing bearing equivalent
- MR150 bearing equivalent
- MR-150 bearing equivalent
Execution guidance
High load axial support design and inspection
Design function
A separate hardened axial support carries higher side load than the compact standard arrangement.
Installation and adjustment
Confirm support orientation, available structural clearance and the specified washer or mounting arrangement.
Inspection focus
Inspect the hardened support, contact face, axial position, washer stack and both load paths.
Application
Application and RFQ checklist
Heavy masts, steel handling, logistics equipment and high-load linear guide structures.
Information required for selection
- Dimensions
- d, D, H, B, S, T and plate or stud geometry
- Load
- Radial load, axial load, shock, speed and duty cycle
- Execution
- Standard, precision, fixed axial or eccentric-adjustable
- Environment
- Temperature, contamination, sealing and lubrication
Related combined bearing models
Browse adjacent models for dimensions, applications and common cross references.
MR.149 MR.148G2 · MR149 high load combined bearing · MR149 MR.151 MR.151G2 · MR151 high load combined bearing · MR151G2 MR.146 MR.146G2 · MR146 high load combined bearing · MR146 MR.147 MR.146G2 · MR147 high load combined bearing · MR147 MR.148 MR.148G2 · MR148 high load combined bearing · MR148 MR.142 MR.142G2 · 4.0784 · JD107.7-69-KZ 